Sony HT-AF5 Operating Instructions Manual page 29

Confirming/saving the
measurement results
1
Confirm the measurement
result.
When the measurement ends, a beep
sounds and the measurement result
appears on the display.
Measurement Display
result
When the SAVE
measurement EXIT
process
completes
properly
When the ERROR
measurement XXXX
process fails
2
Press V/v repeatedly to select
the item, then press
Item Explanation
SAVE EXIT Saves the measurement
results and exits the setting
process.
WRN CHECK Displays warning
concerning the
measurement results. See
"When you select "WRN
CHECK"" (page 29).
DIST INFO Displays the measurement
result for speaker distance.
LEVEL INFO Displays the measurement
result for speaker level.
EXIT Exits the setting process
without saving the
measurement results.
Note
After "SAVE EXIT" is displayed for 50
seconds, the measurement result is saved
automatically, without the need to save the
procedure.
3
When error codes appear
Try the remedies and perform the Auto
Calibration again.
Error code
ERROR 32
Explanation
Proceed to
step 2.
ERROR F 33
See "When
error codes
appear" (page
29).
ERROR SR33 Either the surround left or
.
ERROR SW33 The subwoofer is not connected or
When you select "WRN CHECK"
If a warning on the measurement result is
present, detailed information is displayed.
Press
"Confirming/saving the
measurement results".
Warning code Explanation
WARNING 40 The Auto Calibration has
Save the measurement result.
Select "SAVE EXIT" in step 2.
The measurement results are saved.
Cause and remedies
• The sound received by the
optimizer microphone is out of
the acceptable range.
• The optimizer microphone or
subwoofer may be damaged.
Contact your Sony dealer or local
authorized Sony service facility.
The front speakers are not
connected or either the front left or
front right speaker is not
connected.
Check that the front speakers are
connected properly.
surround right speaker is not
connected.
Check that the surround speakers
are connected properly.
it may be damaged.
Contact your Sony dealer or local
authorized Sony service facility.
or B to return to step 2 of
completed. However, the noise
level is high. You may be able to
perform the Auto Calibration
properly if you try it again, even
though the measurement cannot
be performed in all environments.
Try to perform the Auto
Calibration in a quiet
environment.
continued
29 GB