Sony HT-AF5 Operating Instructions Manual page 54

To perform pairing
1
Place the S-AIR sub unit that
you want to pair near the S-AIR
main unit.
Note
Remove headphones from the surround
amplifier (if connected).
2
Match the IDs of the S-AIR main
unit and the S-AIR sub unit.
• To set the ID of the S-AIR main unit,
see "To set the ID of the S-AIR main
unit" (page 52).
• To set the ID of the S-AIR sub unit,
refer to the operating instructions
supplied with the S-AIR sub unit.
3
Press AMP MENU.
"LEVEL" appears on the display.
4
Press V/v repeatedly until
"S-AIR SET" appears, then
or b.
press
5
Press V/v repeatedly until
"PAIRING" appears, then press
or b.
6
Press V/v repeatedly until the
setting you want appears,
then press
• START: The S-AIR main unit starts
pairing.
• CONDITION: You can check the
current ID. When the pairing setting is
timed out, "NO PAIRING" appears on
the display.
54
GB
.
7
Start pairing of the S-AIR sub
unit.
x For the surround amplifier
Refer to the operating instructions
supplied with surround amplifier.
x For the S-AIR receiver
Refer to the operating instructions
supplied with S-AIR receiver.
8
Pairing completed.
"COMPLETE" appears on the display.
9
Press AMP MENU.
The AMP MENU turns off.
Note
Perform the pairing within several minutes after you
select "START" in step 6. Otherwise, the pairing is
canceled automatically and "INCOMPLETE"
appears on the display.
To cancel pairing
Reset the ID of the S-AIR main unit. For
details, see "To set the ID of the S-AIR main
unit" (page 52). You can set the same ID as
before.