Test Tone; Speaker Level - Sony HT-AF5 Operating Instructions Manual

a) For details, see "Enjoying the sound at low volume
(NIGHT MODE)" (page 36).
b) This parameter is only available when SAT/CATV
input is selected.
c) For details, see "Preparing for the "BRAVIA" Sync"
(page 41).
d) This parameter is only available when "CTRL
HDMI" is set to "CTRL ON".
e) When the Auto Calibration result is saved, you can
adjust the setting in 0.01 meter increment.
f) This parameter is only available when "CENTER
SP" is set to "CENTER YES".
g) This parameter is only available when "SUR SP" is
set to "SUR YES".
h) For details, see "Performing Auto Calibration" (page
28).
i) This parameter is only available when the result of
the Auto Calibration is saved.
j) This menu is only available when you insert the
S-AIR transmitter (not supplied). For details, see
"Setting up an S-AIR product" (page 50).
LEVEL menu
You can adjust the level of each speaker to suit
your preference.
x TEST TONE
You can adjust the speaker levels while
listening to the test tone from your listening
position.
x FL LEVEL (Front left speaker
level)
x CNT LEVEL (Center speaker
level)
x FR LEVEL (Front right speaker
level)
x SR LEVEL (Surround right

speaker level)

x SL LEVEL (Surround left speaker
level)
x SW LEVEL (Subwoofer level)
To adjust the speaker levels
1
Press V/v repeatedly until "TEST TONE"
appears, then press
2
Press V/v repeatedly until "T. TONE ON"
appears, then press
The test tone is output from each speaker in
sequence as follows:
Front left t Center t Front right t Surround
right t Surround left t Subwoofer
3
Press B until "TEST TONE" appears.
4
Press V/v repeatedly to select the desired
speaker, then press
The test tone is emitted from the speaker that is
being adjusted only.
• FL LEVEL, CNT LEVEL, FR LEVEL,
SR LEVEL, SL LEVEL, SW LEVEL.
Notes
• "CNT LEVEL" does not appear when you set
"CENTER NO" in the "SP SETUP" setting.
• "SR LEVEL" and "SL LEVEL" do not appear
when you set "SUR NO" in the "SP SETUP"
setting.
5
Press V/v repeatedly to adjust the speaker
level, then press
You can adjust from –6.0 dB to +6.0 dB in 0.5 dB
steps.
Note
If you do not adjust for a certain period, the test
tone is emitted from the next speaker in sequence.
6
Repeat steps 4 and 5 to adjust the other
speaker level.
7
After you have finished making
adjustments, press V/v repeatedly until
"TEST TONE" appears, then press
or b.
8
Press V/v repeatedly until
"T. TONE OFF" appears, then press
or b.
.
or b.
.
.
continued
63 GB