Kenwood KCH-16 Service Manual page 6

KCH-16
6. PC Mode
6-1. Preface
The TK-5710/5710H/5810/5810H transceiver and the
KCH-16 are programmed using a personal computer, pro-
gramming interface (KPG-43/43A), USB adapter (KCT-53U),
programming software (KPG-95D), Interface box (KRK-11),
control cable (KCT-22) and Panel assembly (KRK-11).
Figure 1 shows the setup of a PC for programming.
KRK-11 (Interface box)
KCH-16
6
REALIGNMENT
KCH-16
KPG-95D
External
speaker
KRK-11
Interface box
PC
D-SUB (25-pin)
KPG-43
KCT-22
KRK-11
KCH-16
(Panel assembly)
Transceiver
PC
KPG-43 or KPG-43A or
KPG-43A + KCT-53U
Illustration is KPG-43.
Transceiver
KCT-22
Control cable
PC
D-SUB (9-pin)
KPG-43A
KRK-11 (Interface box)
KCT-22
KRK-11
(Panel assembly)
Transceiver
Fig. 1
KRK-11
Panel assembly
PC
USB
KCT-53U
KPG-43A
KRK-11 (Interface box)
KCT-22
KRK-11
KCH-16
(Panel assembly)
Transceiver