Kenwood KCH-16 Service Manual page 5

2. How to Enter Each Mode
Mode
User mode
Panel test mode
PC mode
Panel tuning mode
Firmware programming mode
Clone mode
Self programming mode
Firmware version information
Clock adjustment mode
Transceiver information mode
KCH-16 Firmware programming
mode
3. Getting Acquainted
q Power
switch
Press to switch the transceiver ON. Press and hold for
approximately 1 second to switch the transceiver OFF.
w Display
e Right (Zone Up)
key
Press to increase the zone number (Default setting). Also
press to increase setting adjustments.
r Left (Zone Down)
key
Press to decrease the zone number (Default setting).
Also press to decrease setting adjustments.
t VOL (Volume) control
Rotate clockwise to increase the volume level. Rotate
counterclockwise to decrease the volume level.
REALIGNMENT
Operation
Power ON
[S] + Power ON
Received commands from PC
[Panel test mode] + [ ]
[A] + Power ON
[Orange] + Power ON
[ ] + Power ON
[B] + Power ON
[C] + Power ON
[S] + [B] + Power ON
[ ] + [ ] + Power ON
Microphone
y DTMF keypad
Press the keys on the keypad to make DTMF calls.
The default setting is None (no function).
u Up (Channel Up)
key : PF 6 (Programmable Function)
key
Press to increase the channel number (Default setting).
Your dealer can also enable the CH key to be used when
making setting adjustments, as an optional method for
using the Right key.
i Down (Channel Down)
Function) key
Press to decrease the channel number (Default setting).
Your dealer can also enable the CH key to be used when
making setting adjustments, as an optional method for
using the Left key.
o S / A / B / C / Orange (Programmable Function) keys
Press to activate their programmable functions.
The default setting is None (no function).
!0 TX/ BUSY indicator
The TX/ BUSY indicator lights red while transmitting and
green while receiving.
!1 PTT (Push-To-Talk) switch
Press and hold this switch, then speak into the micro-
phone to call a station.
!2 HOOK
● Key name (function) comparison
(in regards to the KCH-14/ KCH-15)
KCH-14
GRP GRP
(Zone Up) (Zone Up)
GRP GRP
(Zone Down) (Zone Down) (Zone Down)
CH (Channel
CH (Channel)
Up/Down)
MON
(Monitor)
SCN (Scan)
PF 1 PF 1 (None)
PF 2 PF 2 (None)
PF 3 PF 3 (None)
PF 4 PF 4 (None)
PF 5 PF 5 (None)
PF 6
PF 7
PF 8
PF 9
4. Panel Test Mode
Setting method refer to ADJUSTMENT.
5. Panel Tuning Mode
Setting method refer to ADJUSTMENT.
KCH-16
key :PF 7 (Programmable
KCH-15 KCH-16
GRP Right
(Zone Up) (Zone Up)
GRP Left
(Zone Down)
CH(Channel
Up/Down)
MON
(Monitor)
SCN (Scan)
PF 1 (None) S (None)
PF 2 (None) A (None)
PF 3 (None) B (None)
PF 4 (None) C (None)
PF 5 (None) Orange (None)
PF 6 (None) Up (Channel Up)
Down (Channel
PF 7 (None)
Down)
PF 8 (None)
PF 9 (None)
5