Disassembly For Repair - Kenwood KCH-16 Service Manual

KCH-16
Precautions for Disassembly
■ Removing the case packing (G53-1805-02)
Remove the case packing from the front case slowly, so
as not to stress the MIC2 lead wires.
■ Removing the volume knob (K29-9430-03)
1. Rotate the volume knob fully clockwise.
2. Insert a fl at-head screwdriver between the volume knob
and the case.
Note: Use a fl at-head screwdriver with a blade thickness
of 0.5mm or less.
3. Remove the volume knob while prying the flat-head
screwdriver up and down.
Note: Remove the volume knob carefully, as there is a
possibility of damaging the case.
Volume knob
18

DISASSEMBLY FOR REPAIR

Precautions for Reassembly
■ Installing the power switch key top (K29-9433-03)
and shading board (F15-1017-04)
1. Insert the power switch key top q onto the case.
2. Insert the shading board w onto the case.
3. Mount the Control unit onto the case.