Realignment - Kenwood KCH-16 Service Manual

KCH-16
The mode when the KCH-16 Handheld control head is connected with the TK-5710/5710H/5810/5810H transceiver via the
KRK-11 Interface box and KRK-11 Panel assembly is described below.
1. Modes
● Transceiver (TK-5710/5710H/5810/5810H)
User mode
Panel test mode
PC mode
Firmware pro-
gramming mode
Clone mode
Self programming mode
Firmware version information
Clock adjustment mode
Transceiver information mode
Mode
User mode
Panel test mode
Panel tuning mode
PC mode
Data programming
mode
PC test mode
Firmware program-
ming mode
Clone mode
Self programming
mode
Firmware version
information
Clock adjustment
mode
Transceiver informa-
tion mode
4

REALIGNMENT

Panel tuning mode
Data programming mode
PC tuning mode
PC test mode
Function
For normal use.
Used by the dealer to check the funda-
mental characteristics.
Used by the dealer to tune the trans-
ceiver.
Used for communication between the
transceiver and PC (IBM compatible).
Used to read and write frequency data
and other features to and from the trans-
ceiver.
Used to check the transceiver using the
PC. This feature is included in the FPU.
See panel tuning.
Used when changing the main program
of the fl ash memory of the transceiver.
Used to transfer programming data from
one transceiver to another.
You can program the frequency, signal-
ing and other functions using only the
transceiver.
Used to confi rm the internal fi rmware
version.
Used by the dealer to adjust date and
time.
Used to confi rm the transceiver fi rmware
version.
● KCH-16
KCH-16 Firmware
programming mode
Mode
KCH-16 Firmware Used when changing the main program
programming mode of the fl ash memory of the KCH-16.
Function