Installing Software; Connecting Samsung Digital Presenter To Pc - Samsung SDP-850DX Software User's Manual

Installing software

To install the software
1. Connect your Samsung Digital Presenter to the PC with USB cable. See the current page.
2. Install the USB driver. See page 4.
3. Install the Samsung Digital Presenter control program. See page 6.
Follow the instructions below to complete the installation:

Connecting Samsung Digital Presenter to PC

1. Make sure that both the Samsung Digital Presenter and a computer are turned on.
2. Plug one end of the USB cable into the USB port on the Samsung Digital Presenter.
3. Plug the other end into the USB port on the computer.
✔
Caution : • When choosing a USB port, it is recommended to use a port directly
connected to the main mother board on the computer. (Problems can
occur in extended, front-side USB ports or with USB hubs without
power depending on the computer.)
3