Table of Contents
Advertisement
Before attempting to operate this product, Please read the instructions carefully.
Before attempting to operate this product, Please read the instructions carefully.
HIGH RESOLUTION DIGITAL PRESENTER
HIGH RESOLUTION DIGITAL PRESENTER
USER'S MANUAL
USER'S MANUAL
SDP-950DXA/STA
SDP-950DXA/STA
www.samsungpresenter.com
www.samsungpresenter.com
ENGLISH
ENGLISH
Advertisement
Table of Contents
Related Manuals for Samsung SDP-950DXA
Summary of Contents for Samsung SDP-950DXA
- Page 1 HIGH RESOLUTION DIGITAL PRESENTER HIGH RESOLUTION DIGITAL PRESENTER USER'S MANUAL USER'S MANUAL SDP-950DXA/STA SDP-950DXA/STA Before attempting to operate this product, Please read the instructions carefully. Before attempting to operate this product, Please read the instructions carefully. www.samsungpresenter.com www.samsungpresenter.com ENGLISH ENGLISH...
-
Page 2: Special Features
SDP-950 Special features Thank you for purchasing this product. This product is a high resolution digital presenter that can project all kinds of data on a PC monitor, a TV or a large screen with simple operations. 12X optical zoom lens and 3X digital zoom By adopting 12X super optic angle zoom lens, it is possible to shoot all materials from the size of a 35mm film to A4 size. -
Page 3: Input Source Selection
Features Various image control Digital features on your Digital Presenter provide useful and various image controls including: - Negative/Positive image conversion - Brightness and R/B color control - Image rotation - Image save/recall - Image freeze - Image divide Input source selection You can quickly switch between your computer presentation and your document presentation with the INT/EXT button on the control panel or on the remote controller. -
Page 4: Table Of Contents
SDP-950 Contents Product features and structure Safety precautions...5 Uses of digital presenter ...6 Supplied accessories ...7 Name and function of each part ...8 Operation methods Set preparation...14 Connecting to output device ...15 Using the presenter ...18 Adjusting your image ...23 Adjusting your image with GUI...28 Changing your image with Draw ...38 Before requesting service... -
Page 5: Safety Precautions
Safety precautions Follow these safety instructions when setting up and using your Digital Presenter: 1. Do not place the presenter on an unstable cart, stand, or table. 2. Do not use the presenter near water or sources of heat. 3. Use the type of power source indicated on the presenter. -
Page 6: Uses Of Digital Presenter
SDP-950 Uses of digital presenter Conference Detailed information in a report, form, table, etc. as well as a three dimensional object, such as a model, can be projected on a screen clearly that all the participants can focus on the same topic during a conference. Thus it is very helpful for an effective progress of a conference. -
Page 7: Supplied Accessories
When you unpack your Digital Presenter, make sure that you have all these components. User's Manual C-Composite cable DVI cable Power cable S-video cable Remote controller Lens cap PC Monitor cable PS/2 Mouse USB Cable SDP-950 program Option Suitcase 2 Batteries (The unit is only for SDP-950DXA) Page... -
Page 8: Name And Function Of Each Part
SDP-950 Name and function of each part Front side Lens Can rotate to the front and back. Page... -
Page 9: Lamp Unit
Main support Main lock button Press to move the main support. Lamp unit (Upper lamp) Document plate (built-in light box) Main control panel IR Sensor Remote control depository Press to use the remote control. Page... -
Page 10: Main Control Panel
SDP-950DXA SDP-950STA POWER Use this to turn the power on or off. ROTATE (SDP-950DXA ONLY) Use this to rotate the image. NEGA/POSI (SDP-950DXA ONLY) Use this to turn the image negative or positive. ZOOM Use this to control the size of an object projected on the screen. -
Page 11: Terminals At The Back
Name and function of each part Terminals at the back THE KENSINGTON SECURITY SLOT Connect Kensington Slim MicroSaver security cable to this slot to attach the presenter to an immovable object. MOUSE Use this to connect PS/2 Mouse. (See page 17.) VGA VIDEO OUTPUT 1,2 Connect this to the RGB input terminal of a PC monitor or a projector by supplied PC cable. -
Page 12: On The Remote Controller
SDP-950 Name and function of each part On the remote controller Page... - Page 13 NEGA/POSI Switches for negative or positive film. FREEZE Keeps the current image on the screen. 3X3 MODE (For the SDP-950DXA ONLY) Switches to 3X3 Multi ON or 3X3 Multi OFF. ROTATE (For the SDP-950DXA ONLY) Use this to rotate the image by 90˚, 180˚, 270˚, 0˚.
-
Page 14: Set Preparation
SDP-950 Set preparation Press the main lock button and raise the main support Adjust the angle of the lamps properly. Remove the lens cap. Page Raise the lamp unit until it is convenient for use, and set it to the center of the document plate. Turn the lens area to face downward. -
Page 15: Connecting To Output Device
Connecting to output device PC Monitor, Projector or DVI supporting devices Connection Connect to the VGA input terminal PC monitor, projector, etc Connect to the DVI input terminal Monitor, projector, etc Connect a TV, PC monitor, Projector and DVI supporting devices(Monitor or Projector)to this presenter to display the projected images using the appropriate cable. -
Page 16: Desktop Computer
SDP-950 Connecting to output device Connecting Computer USB connection Connect to the USB port on your PC, then install the supplied SDP-950 Series program. We recommend you to connect to USB port which is attached on computer main board. Caution (It can make troubles in extended front-side USB port or USB hub without power in accordance with computers.) Be sure to use the USB cable shorter than 5.0 m. -
Page 17: Computer
Connecting to output device Connection Connect the cable to the VGA input terminal PC monitor, projector, etc. Connect to VGA IN terminal using the VGA cable from the computer. VGA IN terminal is available. Connect the cable to VGA port on the computer equipped with XGA, SXGA, UXGA graphic card. PS/2 Mouse If you connect PS/2 mouse through MOUSE port, you can control various functions of digital presenter. -
Page 18: Using The Presenter
SDP-950 Using the presenter To show the image received from external devices Set up your digital presenter properly. (See page 15.) Connect the input device from which you want to receive the image and the output device in which you want to show the image. - Page 19 Using the presenter Choose the video source with the INT/EXT button of the presenter. IRIS INT/EXT LAMP • If Blank Image is displayed, check if the external input device is connected properly. • Although you select INT or EXT1/EXT2, the current status is not displayed. •...
-
Page 20: To Project An Object On The Digital Presenter
SDP-950 Using the presenter To project an object on the digital presenter Set up your digital presenter properly. (See page 15.) Connect the presenter to a PC monitor or projector to display the image. (See page 15.) Turn the power of the output device and the digital presenter on. Place the object on the document plate, and adjust the head to face the object. - Page 21 Using the presenter Select a proper lighting source with the LAMP button of the presenter. Each time you press the button, upper lamps on, lightbox on, then all lightings off. IRIS LAMP FREEZE • It wil take two minutes to project on the optimum brightness after turning on presenter. And then you can execute AWC button to adjust the color status.
- Page 22 SDP-950 Using the presenter Focus on the object. • Auto focus control: Press AF button. • Manual focus control: press [Focus F] or [Focus N] to adjust manually. You see the image on the PC monitor or the projector or DVI supporting devices (monitor or projector) •...
-
Page 23: Adjusting Your Image
Adjusting your image Use the control buttons on the remote controller or on the control panel of the presenter to adjust the projected image. Some of the main features are described below: Adjusting image size Press WIDE or TELE button on the remote controller to change the image size displayed on the screen. You can also use ZOOM or ZOOM ROTATE... -
Page 24: Adjusting Image Color
SDP-950 Adjusting your image Adjusting image color For automatic color adjustment, press AWC button. If you want fine level adjustment, press BLUE + / - or RED + / - button on the remote controller to increase or decrease blue or red color factor manually. IRIS LAMP Positive and negative switching... - Page 25 TXT/IMG NTSC/PAL switching Switches Video output mode to NTSC or PAL. Saving image in memory (SDP-950DXA Only) You can save the image up to 8 frames into your digital presenter's memory. After saving, you will be able to recall it.
- Page 26 SDP-950 Adjusting your image Screen 2 divide and image shift (SDP-950DXA Only) You can see both the image of an object currently projected and the image saved in memory simultaneously on one screen. The recalled image from memory appears at left side. Press SHIFT button to shift the image from right to left.
- Page 27 Adjusting your image Saving custom user setting After you adjust feature value, you can save the value for next time use. You can save up to 4 different custom user settings. (You can save the setting on the Zoom, Focus, Iris, Lamp state and Color level buttons.) You can not save the setting on the FREEZE, RECALL, DIVIDE, SHIFT and ROTATE functions.
-
Page 28: Adjusting Your Image With Gui
SDP-950 Adjusting your image with GUI The SDP-950 supports GUI menu system to control various function of digital presenter with mouse operation. To use GUI menu system, first of all, mouse device (PS/2 type) must be connected to mouse control terminal, if it is connected with success, mouse pointer will be appeared on the screen. - Page 29 Adjusting your image with GUI Focus Allow to focus an object in the far / near distance, or automatically. When holding down [Far]/[Near] menu with the left mouse button, focus is activated. Click [Auto] menu to work auto focus function. Zoom Allow to change the image size.
- Page 30 SDP-950 Adjusting your image with GUI Red / Blue Allow to adjust image color through the red/blue gain control When holding down [Up]/[Down] menu with the left mouse button, red/blue gain control is activated. Allow to adjust image color automatically through automatic white balance control When you click [AWC] menu with the left mouse button, AWC function is executed once.
-
Page 31: Digital Section
[Freeze] menu turns checked state. To release freeze mode, click [freeze] menu again or click [Cancel] menu with the left mouse button (and then [Freeze] menu turns unchecked state). Rotate (For the SDP-950DXA Only) Allow to rotate the image by 0˚(Off), 90°, 180°, 270°. Click [0°/90°/180°/270°] menu with the left mouse button, image is rotated by user’s request and menu turns checked state following current status of image. - Page 32 SDP-950 Adjusting your image with GUI Save / Recall (For the SDP-950DXA Only) Allow to save the projected image into the memory of digital presenter or recall the image from the memory. To save / recall the image with the proper save number, Click [numbers] menu with the left mouse button, current image is saved into or recalled from memory.
- Page 33 Adjusting your image with GUI Divide (For the SDP-950DXA Only) Allow to divide the screen to show both of the current image and the image recalled from the memory simultaneously on one screen. Click [numbers] menu with the left mouse button, screen is divided and selected number of the image is recalled from memory.
- Page 34 SDP-950 Adjusting your image with GUI 3x3 Multi (For the SDP-950DXA Only) Allow to see all the images in the memory (up to 8 frames) on one screen. Click [3x3 Multi] menu with the left mouse button, 9 divide mode is activated and GUI menu disappeared.
-
Page 35: Miscellaneous Section
Adjusting your image with GUI Miscellaneous section Misc menu deals with miscellaneous function of digital presenter. Preset Save / Exe Allow to save the customized user setting values or to activate the preset user setting. Click [numbers] menu with the left mouse button, current setting value is saved to flash ROM or load setting value from flash ROM. - Page 36 SDP-950 Adjusting your image with GUI NEGA Effect Allow to switch for negative / positive image (default : positive). Click [NEGA Effect] menu with the left mouse button, current image turns negative image and menu turns checked state. To return positive image, click [NEGA Effect] menu again (and then menu turns unchecked state).
-
Page 37: Exit Section
Adjusting your image with GUI Lamp Allow to turn the upper lamps or lightbox on or off. Click [All off/Upper/Lower] menu with the left mouse button, lamp mode is switched to current value. Exit section GUI main menu disappears and only the mouse pointer remains displayed. Tips : Drag and Drop Function GUI main menu can take any position of screen using Drag and Drop. -
Page 38: Changing Your Image With Draw
SDP-950 Changing your image with Draw SDP-950 series support to GUI Drawing system to draw straight lines, freehand lines, rectangular on the screen with mouse operation. To use GUI Drawing system, first of all, GUI menu system and [Freeze] or [Recall] function must be activated. Then Draw menu is now being activated. -
Page 39: Exit Button
Changing your image with Draw Exit Button Use the Exit button ( ) to exit GUI Drawing system to normal mode, or clear all the user’s images on the full screen. Tool Selection Use the Line Width Selection to set the line width to between 1 and 4 pixels. Drawing the single line To draw a single line, Click the single line icon and then, 1) Position the cursor on the screen where you want the line to start. - Page 40 SDP-950 Changing your image with Draw Foreground / Background Color Panel There are two active colors in GUI Drawing System, the foreground (left mouse click) and background(right mouse click) colors. You can change the brush colors by selecting new foreground and background solid colors using the Color Palette.
-
Page 41: Storage
Storage Turn the power off and unplug the power cord. Turn the head upside down. Attach the lens cap. Fold the middle of the head backward. While you pull the main lock button toward the front of the presenter, fold the head completely. - Page 42 SDP-950 Fold the lamps on both sides completely. When you do not use it for a long time, protect it with the suitcase supplied. (SDP-950 DXA only) Page...
-
Page 43: Trouble Shooting
Trouble shooting No image appears - Check if the resolution of the output device corresponds to that of the digital presenter. (For example, when the maximum resolution of a projector is SVGA and if the digital presenter is set to XGA, then no image appears.) - Check if the input selection of the output device is appropriate. -
Page 44: Battery Replacement
SDP-950 Battery replacement Open the battery compartment lid at the back of the remote controller. Close the lid. Random replacement of built-in battery by other types of batteries may cause explosion. Caution Thus, the battery shall be replaced by the same battery. And the used batteries shall be disposed carefully because they can cause environment pollutions. -
Page 45: Specifications
Mac Program(Mac OS 10.2) +5˚C ~ +35˚C, 30% ~ 90% DC12V (Adaptor INPUT: AC100V~240V Free Voltage, 50/60Hz, OUTPUT: 12V, 4.0A) In-use: 650(W) x 566(H) x 407(D) Storage: 477(W) x 154(H) x 407(D) 4.8kg Remote controller, Cables, etc., Suitcase (SDP-950DXA Only) Page...