Installing The Program; Connecting The Digital Presenter To The Pc - Samsung Digital Presenter Software User Manual

installation

INSTallINg ThE PrOgram

Following the instructions below to install the program.
1. Use the USB cable to connect between Samsung Digital Presenter and PC. Then, turn on the digital
presenter.
2. Install the Samsung Digital Presenter program.
For more information, refer to "Installing Samsung Digital Presenter installer program". (page 5)
Connecting Samsung Digital Presenter to the PC
Connect one end of the USB cable to the USB port of the PC, and the other end to that of the digital
presenter.
Plug the power cable and turn on the presenter.
RS-232C
DC 5V IN
It is recommended to connect the USB cable to the USB port on the main board of your PC.
J `
(Using an extension front port or the bus-power USB hub may cause a problem, depending on the manufacturer.)
Use only the USB cable of less than 4.0m in length.
Use the USB cable provided by Samsung Techwin.
`
(Using a cable from different manufacturer may cause problem depending on the cable specifications.)
4_
installation
USB Cable
USB
USB C-VIDEO VGA OUT
Digital Presenter
PC