Samsung SDP-950STA Quick Start Manual

SDP-950DXA/STA
B A S I C
The Samsung SDP-950DXA/STA provides control of the basic operations on the front panel of the Digital Presenter.
Please note that you can also access these features via the Remote Control or the PS/2 Mouse by right-clicking on the mouse button
to access the menu. Advanced features are found on both the remote and menu commands via the mouse.
Turn on the main power switch of the Use the ROTATE button to electronically
"flip" your portrait documents for sharper
document camera. After the boot-up
results and better display. Press the
screen, the presenter will perform an
ROTATE button once to rotate the docu-
automatic white balance or "Color
ment in 90°, 180°, 270°, 0°increments.
Adjustment."
Tip: Make sure there is no subject
matter on the display surface to affect
Press the NEGA/POSI conversion but-
white balance. Printed text on white
ton. Each time you press the button,
paper is OK.
Nega or Posi appears alternately on
the screen.
TXT/IMG
Press the TXT/IMG button
to control the sharpness
of the output image.
TXT : For a material with mostly words.
IMG : For a material with mostly image.
ZOOM
Press the ZOOM or ZOOM settings to reduce
or enlarge the image size.
Tip:
Make sure you're not moving the subject during auto focus. If
the subject is blurry, press the AF button to re-focus.
Note: If you save an image when in the Digital Zoom mode, the
SDP-950DXA/STA will only save the maximum optical zoom image
(12x) to maintain overall image quality.
O P E R A T I O N S
ROTATE AF
(DXA Only)
Pressing the AF button will activate an
auto focus adjustment at any time.
Manual focus is available on the remote
or menu via the mouse.
Tip:
Use the mouse and the built-in menu
command for extremely accurate manual
NEGA/POSI
(STA Only)
focus control...especially good for 3-
dimensional subjects when at maximum
zoom.
FREEZE
Use the FREEZE button to "hold" any image on the screen while
you change your subject or to freeze a subject in any position.
To release the FREEZE mode, press the FREEZE button again or
EXIT button on the remote control.
Tip:
The FREEZE button is used to freeze a live image or divided
image in order to activate the Draw menu command for annota-
tion.

Quick Start Guide

IRIS
The IRIS buttons (brightness control)
are used to lighten or darken
the overall image for the
desired result.
LAMP
Select a proper lighting source with the LAMP
button of the presenter. Pressing the LAMP
button turns the upper lamp on or off.
Tip
: Use the upper lamps for documents and
other subjects. Use the built-in Lightbox to
illuminate overheads, X-rays, and slides.
SAMSUNG TECHWIN CO.,LTD.
SDP-950DXA
INT/EXT
Use this to switch between internal or
external images.
INT : to view the image from the
SDP-950DXA/STA.
EXT : to view the VGA output from another
source such as a personal computer
connected to the VGA input of the
presenter.
AWC
For automatic color adjustment, press
the AWC button.
Tip:
For best results, only activate AWC
with a white surface under the lens.
presenter
www.samsung .com