Inquiry Data; Table 5. Elite 9 Family Drives Inquiry Data - Seagate Elite 9 Product Manual

48
11.3.1
Bytes Data (hex)
0-15 00 00 **
16-31 53 54 [34 31 30 38 30 30
32-47 R# R# R# R# S# S# S# S# S# S# S# S# 00 00
48-63 00 00 00
64-79 00 00 00
80-95 00 00 00
96-111 00 43 6F
112-127 39* 39* 34* 20 53 65 61 67
128-143 72 69 67
144-147 D# D# D# D#
* Copyright year (changes with actual year).
** 01 = SCSI-1 implemented.
02 = SCSI-2 implemented (default).
The drive can be changed between these two configurations.
*** 01 = Response data is in SCSI-1 format and has compatibility with Common Command Set data.
02 = Response data is in SCSI-2 format (default).
The drive can be changed between these two configurations.
R# Four ASCII digits representing the last four digits of the product firmware release number.
S# Eight ASCII digits representing the eight digits of the product serial number.
D# Reserved 0000.
[ ] Bytes 18 through 24 reflect the model of the drive (hex values for ST410800N drive are
shown).
Note. Code 20 indicates an empty-character position.

Inquiry data

Table 5 lists the Inquiry command data that the drive should return to the
initiator per the format provided in the SCSI-2 Interface Product Manual.

Table 5. Elite 9 family drives inquiry data

*** 8F 00 00 1A 53
00 00 00 00 00
00 00 00 00 00
00 00 00 00 00
70 79 72 69 67
68 74 73 20 72
Elite 9 Product Manual, Rev. C
45 41 47 41 54
4E] 20 20 20 20 20
00 00 00 00 00 00
00 00 00 00 00 00
00 00 00 00 00 00
68 74 20 28 63 29
61 74 65 20 41 6C 6C 20
65 73 65 72 76 65
45 20 Vendor ID
20 20 Product ID
00 00
00 00
00 00
00 00
20 31* *Copyright
notice
64 20