BMW G 310 R Rider's Manual page 91

Replacing bulbs for front
and rear turn indicators
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Remove screw 1.
Pull the glass out of the light
housing at the threaded-
fastener side.
Turn bulb 2 counter-clockwise
and remove it from the light
housing.
Replace the defective bulb.
Bulbs for flashing turn
indicators, front
RY10W / 12 V / 10 W
Bulbs for flashing turn
indicators, rear
RY10W / 12 V / 10 W
Use a clean, dry cloth to hold
the bulb in order to keep the
glass free of dirt and foreign
matter.
Turn bulb 2 clockwise to install
it in the bulb housing.
8
89
z