BMW G 310 R Rider's Manual page 83

quick-release axle has been
removed.
Press brake caliper 1 against
brake disc 2.
Brake piston has been pushed
back.
Remove nut 6 using the right
tool from the toolkit.
Remove washer.
Slacken locknuts 3 on left and
right.
Screw in the adjusting
screws 4 on the left and right.
Remove the chain tensioner 5
and push the quick-release axle
to the right as far as it will go.
Remove the quick-release
axle 8 and remove the chain
tensioner 7.
Roll the rear wheel as far
forward as possible and
8
81
z