BMW G 310 R Rider's Manual page 71

If pressure points are not clearly
perceptible:
ATTENTION
Work on brake system not
in compliance with correct
procedure
Risk to operational reliability of
the brake system
Have all work on the brake sys-
tem undertaken by trained and
qualified specialists.
Have the brakes checked by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Checking front brake pad
thickness
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Turn the handlebars all the way
to the right.
The brake pads 1 can be seen
from the rear.
Visually inspect the brake pads
to ascertain their thickness.
Check the wear indicators 2.
Brake-pad wear limit,
front
min 1.0 mm (Friction lining
without carrier plate)
If the wear indicating marks are
no longer visible:
8
69
z