BMW G 310 R Rider's Manual page 81

Lift front wheel and fit quick-
release axle 4.
Remove front-wheel stand and
firmly compress front forks sev-
eral times. Do not operate the
brake lever in this process.
Installing the front-wheel stand
( 65).
Install screw 3 and tighten to
specified torque. Counter-hold
quick-release axle on the right-
hand side.
Screw in front-wheel
quick-release axle
50 Nm
Tighten clamping bolts 2 to the
specified tightening torque.
Clamping screws in axle
holder
Tightening sequence: Tighten
screws six times in alternate
sequence
19 Nm
8
79
z