BMW G 310 R Rider's Manual page 85

Position the brake-caliper sup-
port 1 on the guide 2.
When rolling the rear wheel
into position, take care not
to damage wheel-speed
sensor 10.
Roll the rear wheel further into
the swinging arm, while push-
ing brake-caliper carrier 11 for-
ward at the same time.
Roll the rear wheel as far
forward as possible and loop
chain 9 over the sprocket.
Insert the quick-release axle 8
and the chain tensioner 7 into
the swinging arm, brake-caliper
support and rear wheel, mak-
8
83
z