Connecting A Susi Module; Fixing The Decoder - tams elektronik FD-R Extended Series Manual

FD-R Extended

6.12. Connecting a SUSI module

The SUSI interface is a standardized interface for the connection of
accessory modules to a vehicle decoder. Controlling the SUSI module has
to be carried out by the vehicle decoder. In order to make the necessary
settings for the SUSI module you have to program the decoder.
With the appropriate version of the decoder there is a SUSI plug
connector soldered to the decoder back side, fit to insert the socket of
the SUSI module. When you have a FD-R Extended without soldered
plug connector you can solder it supplementary (special component) or
you can solder the connecting cables of the SUSI module directly.
Fig. 7:
Connection of a SUSI module

6.13. Fixing the decoder

After having finished all connections you should fix the decoder, to
avoid short circuits by contact to metal parts of the vehicle, for
example. You can use double sided adhesive tape for it, for example.
English
Page 29