Pom-Update - tams elektronik FD-R Extended Series Manual

FD-R Extended

4.8. POM-update

POM-update is a procedure allowing to update the decoder´s firmware
(= specific decoder software) without dismounting the decoder or using
a specific device. POM-update is based upon programming on main
(POM) for the DCC format.
Preconditions for using the procedure are:

Function decoder FD-R Extended from version 2.0.

Digital central unit with PC interface providing the DCC format and
POM. Hint: As nearly every manufacturer of central units uses his
own procedure for programming on main, the POM-update can be
performed with the following central units only (status 01/2015):
MasterControl (Tams Elektronik)
Intellibox 1 (Uhlenbrock**)
CS2 (Maerklin**)
The current list of central units allowing to perform the POM-update
is available on our homepage.

PC. The system software must support Java.

Software "POM-Updater.exe": You will find it on the CD included in
delivery. It is also available on our homepage for free download.
You can download the current firmware version of the decoder free of
charge from our homepage. If you want to get information on new
firmware versions please subsribe to our newsletter on our hompage.
English
Page 17