Panasonic LUMIX DC-G95 Owner's Manual page 46

2. Getting Started/Basic Operations
Setting the functions to be assigned to 3/4 and dials in the exposure
∫
compensation screen
> [Custom] >
MENU
[Cursor Buttons (Up/Down)]
[Front/Rear Dials]
Temporarily changing the items assigned to the front/rear dials
([Dial Operation Switch])
1
Set a Fn button to [Dial Operation Switch].
• This function is set in the Fn button (Fn1) at the time of purchase.
2
Press the Fn button.
• A guide will be displayed showing the items temporarily
assigned to the front/rear dials.
• If no operations are performed, the guide will disappear in
a few seconds.
3
Rotate the front/rear dials while the guide is
displayed.
4
Press [MENU/SET] and set.
• You can also complete this step by performing either of the operations below:
– Press the shutter button halfway
– Press the Fn button
• You can set the following settings in [Dial Set.] of the [Custom] ([Operation]) menu.
– Operation methods of the front/rear dials
– Operation method of the control dial
– Items to be assigned temporarily to the front/rear dials in [Dial Operation Switch]
[Operation] > [Exposure Comp. Disp. Setting]
[ ] [Exposure Bracket]
[OFF] [OFF]
[ / ] [Exposure Comp.]/[Exposure Comp.]
[ / ] [Flash Adjust.]/[Exposure Comp.]
[OFF/ ] [OFF]/[Exposure Comp.]
[ / ] [Exposure Comp.]/[Flash Adjust.]
[ /OFF] [Exposure Comp.]/[OFF]
(P60)
46
0
WB WB WB WB WB WB WB WB WB WB WB
AWB AWB AWBc AWBw AWBc AWBw
(P48)
WB WB WB WB
ISO ISO ISO ISO
98 98 98
ISO ISO ISO ISO