Table of Contents
Advertisement
5. 4K Photo and Drive Settings
[4K Burst]
[4K Burst(S/S)]
[4K Pre-Burst]
• The camera will perform burst recording of a 4K photo and saves it as a 4K burst file with a
[Rec Format] setting of [MP4].
• When [Auto Review] is enabled, the picture selection screen will be displayed automatically.
To continue recording, press the shutter button halfway to display the recording screen.
• For information on how to select and save pictures from recorded 4K burst files, refer to P128.
1
Press the shutter button halfway.
2
Press and hold the shutter button
fully for as long as you want to
perform recording.
A Press and hold
B Recording is performed
• Press the button fully slightly in advance. Recording starts
approximately 0.5 seconds after it has been pressed fully.
• If you remove your finger from the shutter button immediately after
the start of recording, up to a period of approximately 1.5 seconds
after the moment that the finger has been removed may be
recorded.
1
Press the shutter button fully to
start recording.
2
Press the shutter button fully again
to stop recording.
C Start (First)
D Stop (Second)
E Recording is performed
Setting markers manually
You can add markers if you press [Fn2] during recording.
(Up to 40 markers per recording) When selecting and saving pictures
from a 4K burst file, you can skip to the positions where you added
markers.
Press the shutter button fully.
F Approximately 1 second
G Recording is performed
• AF adjusts focus continuously, and except
in Manual Exposure Mode, it also adjusts
exposure continuously.
• Images may not be displayed as smoothly as when recording with the
normal recording screen.
Recording tips
In situations where you want to lock focus and exposure, such as
when the subject is not at the center, use [AF/AE LOCK].
123
(P110)
Advertisement
Table of Contents
