Table of Contents
Advertisement
10. Using the Wi-Fi/Bluetooth function
After connecting to a Wi-Fi network, you can perform the following operations by
pressing [Wi-Fi]:
[Terminate the Connection]
[Change the Destination]
[Change Settings for Sending
Images]
[Register the Current Destination
to Favorite]
[Network Address]
• Depending on the Wi-Fi function being used or the connection destination, you may not be able
to perform some of these operations.
Describing method
∫
When "select [Select a destination from History]", etc. is
described in a step, perform any of the following operations.
Button operation: Select [Select a destination from History]
Touch operation: Touch [Select a destination from History].
• Do not remove the memory card or battery or move to an area without any reception
while sending images.
• The camera cannot be used to connect to a public wireless LAN connection.
• We strongly recommend that you set an encryption to maintain information security.
• It is recommended to use a fully charged battery when sending images.
• When sending images on a mobile network, high packet communication fees may be incurred
depending on the details of your contract.
• Pictures may not be completely sent depending on radio wave conditions. If the connection is
terminated while sending pictures, pictures with missing sections may be sent.
Terminates the Wi-Fi connection.
Terminates the Wi-Fi connection, and allows you to select
a different Wi-Fi connection.
(P279)
Registering the current connection destination or the
connection method, you can easily connect with the same
connection method next time.
(P299)
with the cursor button, and then press
[MENU/SET].
258
Advertisement
Table of Contents
