Table of Contents
Advertisement
6. Stabilizer, Zoom and Flash
2
Select the menu.
>
MENU
[Wireless]
[Wireless Channel]
[Wireless Setup]
3
Press 3/4 to select an item and then
press [MENU/SET].
• To fire a test flash, press [DISP.].
A Flash output
B Luminosity ratio
C Firing Mode
[Firing
Mode]
[Built-in
¢1
Flash]
/
[External
[Flash
Flash]
¢1
Adjust.]
[Manual
Flash
Adjust.]
[Firing
Mode]
[A Group]/
[B Group]/
[C Group]
[Flash
Adjust.]
[Manual
Flash
Adjust.]
¢1 Not available when [Wireless FP] is set to [ON].
¢2 This option is not displayed when the flash (DMW-FL200L: optional) is attached to the
camera.
¢3 Available when an external flash is attached.
[Rec] > [Flash]
Select [ON].
The flash icon on the screen will be indicated with [WL].
Select the channel you have set for the wireless flashes in
1
step
.
Proceed to step
[TTL]:
¢2, 3
[AUTO]
:
[MANUAL]
¢3
: Set the luminosity ratio of the external flash
[OFF]:
Set the flash output of the camera manually when [Firing Mode] is
set to [TTL].
Set the luminosity ratio of the external flash when [Firing Mode] is
set to [MANUAL].
• You can set from [1/1] (full brightness) to [1/128] in steps of 1/3.
[TTL]:
[AUTO]
¢1
:
[MANUAL]:
[OFF]:
Adjust the output of the wireless flashes manually when [Firing
Mode] is set to [TTL].
Set the luminosity ratio of the wireless flashes when [Firing Mode]
is set to [MANUAL].
• You can set from [1/1] (full brightness) to [1/128] in steps of 1/3.
3
.
The camera automatically sets the output.
Flash output is set by the external flash.
manually.
The flash on the camera side emits only
communication light.
The camera automatically sets the output.
The wireless flashes automatically set the output.
Set the luminosity ratio of the wireless flashes
manually.
The wireless flashes of the specified group will
not fire.
167
Advertisement
Table of Contents
