Table of Contents
Advertisement
9. Menu Guide
[Constant Preview]
You can check the effects of the chosen aperture and shutter speed on the recording
screen in Manual Exposure Mode.
Preview also operates in the MF Assist screen when [Preview While MF Assist] is set to
[ON] in [SET].
• This function does not work when using the flash.
[Live View Boost]
Displays the screen brighter to make it easier to check subjects and compositions even in
low-light environment.
[MODE1]
[MODE2]
• You can change the Recording Mode in which [Live View Boost] works by using [SET].
• This mode does not affect recorded images.
• Noise may be more noticeable in the screen than in the recorded image.
Not available in these cases:
• [Live View Boost] does not work in the following cases:
– When adjusting the exposure (when the shutter button is pressed halfway, for example)
– When recording a motion picture or 4K photo
– When using [Filter Settings]
– When using [Constant Preview]
[Peaking]
In-focus portions (portions on the screen with clear outlines) are highlighted when focus is
being adjusted manually.
• When [Detect Level] in [SET] is set to [HIGH], portions to be highlighted are reduced, allowing
you to achieve a more precise focus.
• Changing the [Detect Level] setting also changes the [Display Color] setting as follows.
[Detect Level]
[Display Color]
Setting for low brightness, with priority given to a soft display.
Setting for high brightness, with priority given to image visibility.
[HIGH]
[
] (Light blue)
[
] (Yellow)
[
] (Yellow-green)
[
] (Pink)
[
] (White)
[LOW]
[
] (Blue)
[
] (Orange)
[
] (Green)
[
] (Red)
[
] (Gray)
220
Advertisement
Table of Contents
