Panasonic LUMIX DC-G95 Owner's Manual page 124

5. 4K Photo and Drive Settings
Setting Pre-Burst Recording ([4K Burst]/[4K Burst(S/S)])
∫
The camera starts recording approximately 1 second before the shutter button is pressed
fully, so you will not miss a photo opportunity.
> [Rec] > [4K PHOTO] > [Pre-Burst Recording]
MENU
Settings: [ON]/[OFF]
• When this function is enabled, [
• When [Pre-Burst Recording] is being used, AF operations and unavailable menus are the
same as those during [4K Pre-Burst] operation.
Setting Loop Recording ([4K Burst(S/S)])
∫
You can perform recording while deleting the oldest recorded data, allowing you to keep
on recording while waiting for a photo opportunity without replacing the card.
• Once you start recording, the 4K burst file will be recorded and divided approximately every
2 minutes.
Approximately the last 10 minutes (up to approximately 12 minutes) will be saved.
The preceding part will be deleted.
> [Rec] > [4K PHOTO] > [Loop Recording(4K PHOTO)]
MENU
Settings: [ON]/[OFF]
• We recommend that you use a sufficiently charged battery or an AC adaptor (optional)
and the DC coupler (optional).
• Up to 12 hours of continuous recording is possible.
• When this function is enabled, [
Not available in these cases:
• [Loop Recording(4K PHOTO)] is not possible when there is insufficient free space on the card.
Battery drainage and camera temperature
• If the ambient temperature is high or 4K photo recording is performed continuously, [
be displayed and then recording may stop. Wait until the camera cools down.
• When [ ] ([4K Pre-Burst])
and the camera temperature rises. Use these functions only when recording with
them.
¢ The setting may switch to [
] is displayed on the recording screen.
] is displayed on the recording screen.
¢ or [Pre-Burst Recording] is set, the battery drains faster
] ([4K Burst]) to protect the camera.
124
] may