Tools Required; Assembly Procedure - CYBEX 625T Owner's Manual

Tools Required

• Phillips screwdriver
• Long 3/8" drive socket extension
• 3/4" Open end wrench
• 7/32" Allen wrench (included)
• 9/16" Open end wrench
• 14 mm Open end wrench

Assembly Procedure

Two people will be required for this procedure.
Read and understand all instructions thoroughly before assembling this unit. Check all items
carefully. If there is damage, see the Customer Service section of this manual for proper procedure
to return, replace, or reorder parts.
The words "left" and "right" denote the user's orientation.
Verify you have received the correct package
1. Read box label to verify the model number and voltage (optional) match what was ordered.
2. Verify paint color matches what was ordered.
Lift and move the treadmill
1. Take note of doorway widths in facility before assembly. The base is 32.5" (83 cm) wide. With uprights
installed the width is 35.6" (90.5 cm).
2. At least two people should lift and move the treadmill to a level location where you intend to leave
it. Use proper lifting methods.
Cybex 625T Treadmill Part Number LT-23221-4 H
Heavy equipment.
• At least two people must lift, move or assemble unit.
• Use safe lifting methods.
Page 17 of 88