Tools Required; Assembly Procedure - CYBEX 790T Owner's Manual

Tools Required

• Phillips screwdriver
• Long 3/8" drive socket extension
• 3/4" Open end wrench
• 7/32" Allen wrench (included)
• 9/16" Open end wrench
• 14 mm Open end wrench

Assembly Procedure

Two people will be required for this procedure.
Read and understand all instructions thoroughly before assembling this unit. Check all items
carefully. If there is damage, see the Customer Service section of this manual for proper procedure
to return, replace, or reorder parts.
The words "left" and "right" denote the user's orientation.
Cybex 790T Treadmill Part Number LT-24933-4 F
Page 17 of 95