Advertisement
FOR HEATING OPERATION
On first use the heater will operate in fan mode. After initial
use the heater will operate on the last programmed setting.
Figure 2
1. By pressing the MODE button (or turning the MODE
knob for BFH3405), select FAN, LOW HIGH or AUTO
(LOW for 750 Watts and HIGH for 1500 Watts).
THERMOSTAT INSTRUCTIONS
This function allows you to set the heater to your desired
comfort level. The heater will maintain the desired room
temperature.
For BFH3405:
1. Set the THERMOSTAT knob to the highest setting,
clockwise as far as it will turn.
2. When the desired room temperature level is reached,
lower the thermostat setting, by turning the
THERMOSTAT knob counter clockwise until it clicks.
The heater will now stop operating.
3. The thermostat will now automatically maintain the
pre-set temperature level by turning the heater on and
off. The thermostat is now set.
For BFH3410 and BFH3420:
1. To change the heater settings, press the MODE button.
Each time you press the MODE button it will scroll to the
settings FAN, LOW, HIGH, or AUTO.
2. Select the AUTO mode.
3. Set the heater to the desired room temperature by
pressing the (+) or (-) buttons. The thermostat is now
set.
Mode
Button
BFH3405
Power
Button
Power
Light
Oscillation
Button
Nightlight
Button
BFH3410/BFH3420
4
Advertisement
