Advertisement
on by children or accidentally tripped over.
TIP: Over time, dust may accumulate on the front grills.
This can be removed by wiping the unit with a damp
cloth. Always unplug unit and allow to cool prior to
cleaning.
AUTO SHUT-OFF
To prevent damage and risks due to overheating this unit
is equipped with a built-in overheat protection device. It
cuts off the power as soon as the heater's internal
temperature becomes too hot. This patented,
technologically advanced system requires the user to
reset the heater if there is a potential overheat situation.
/It will only resume operation when the user resets it.
To Reset the Heater:
1. Unplug the heater and wait 10 minutes for the unit
to cool down.
2. After the 10 minutes, plug the unit in again
and operate normally.
PRE-OPERATING INSTRUCTIONS
Carefully unpack your heater from the box (it is recom-
mended to save the box for off-season storage).
Heat
Exhaust
Oscillation
Base
OPERATING INSTRUCTIONS
Control
Panel
1. Place the unit on a firm level
surface. Plug in the heater
to a 120V power source.
2. To start the unit, press the
POWER button or turn the
mode knob located on the
Air
Intake
control panel. The POWER
light will remain lit while the
heater is in operation.
Figure 1
BFH3420 Shown
3
Advertisement
