Sequence For Recognizing „Heating Element Defect“ - Dometic RM 8 Series Service Manual

SERVICE + MAINTENANCE
*Sequence for recognizing „Heating element defect":
Conditions: Interior temperature >18/64°C/F, corresponding relay is switched on
(120V or 12V), door has to be closed for longer than 5 minutes.
Temperature of reevaporater (a) is recorded
After 2 hours, the temperature (b) is recorded again, if the fridge is in the
same mode
If the temperature difference a-b < 3 °K, the corresponding heating element
error will be indicated
57
TD S57