Service And Maintenance; Gas Valve Description - Dometic RM 8 Series Service Manual

SERVICE + MAINTENANCE INSTALLATION
Some information
Gas Valve GV100
This component includes two serial mounted gas
valves (as part of flame failure device).
Power supply : approx. 1.3V - 1.5V per valve
Power supply : approx. 0,7V - 0,9V per valve
(switched on gas mode)
Inductive resistance : per valve ca. 28,5 Ohm
Measuring points: Voltage and Resistance
TD S47
Valve 1 : Pin 1 - Ground (Housing)
Valve 2 : Pin 2 - Ground (Housing)
Masse
2
1