Record; Prepare Recording; Start Recording; Stop Recording - Kurzweil KA-90 Owner's Manual

KURZWEIl_KA-90_Manual_003_151105.pdf 18 2015-11-06 10:29:51

Record

With the easy-to-use song recording features, you can record your
own keyboard performances as a user song. This piano allows up to 5
user songs to be recorded, stored in internal memory.

Prepare Recording

1.
Before recording, firstly selecting a user song to save the recording
song. Press the [RECORD] button, enter to the selection interface,
the nixie tube displays current user song number: If the nixie tube
displays "r-*", it means a user song has been already saved in this
file. If the nixie tube displays "nF*", it means this file is new and no
user song in it. Press the [+/YES]/[-/ NO] button to select the
desired file to save user song.
2.
Press the [RECORD] button again to enter the recording
preparation status, the LED indicator of [START/ STOP] button
keeps flashing.So you can set the desired voice, style, tempo
parameters......
Note:
The SPLIT function is automatically turned off.

Start Recording

1.
Recording begins automatically as soon as you play a note on the
keyboard. The LED indicator of [RECORD] button keeps lighting.
C
2.
Press the [START/STOP] button to start recording while in the
recording preparation status. And the "auto bass chord"(A.B.C)
M
mode is automatically turned on, but the accompaniment is not
Y
playing and synchronously recorded until you play a note on the
CM left-hand section.
Note:
MY
If you select the "r-*" (which means there is a user song in this file) for
CY
recording, the original user song you saved will be replaced by the
CMY
new data.
K

Stop Recording

1.
Press [RECORD] again while recording can stop this action
immediately.And the nixie tube displays "- - -", the system saves
recording data in internal memory automatically. The indicator of
recording goes out after finishing the saving operation.
2.
When recording is in process, if the memory is full, the recording
will stop and be saved in internal memory automatically. And the
nixie tube displays "FUL", The indicator of recording goes out after
finishing the saving operation.

Play Back the User Song

1.
Press [PLAY/STOP] button, enter the records playback mode. If
this user song you selected contains no data, the nixie tube
displays "nF*", such as "nF3"; if this user song you selected
contains avaliable data, the nixie tube displays the number of user
song "P-*", such as "P-2".
2.
Press the [+/YES]/ [-/NO] button to select a user song.
3.
Press the [PLAY/ STOP] button to play your selected user song.
The LED indicator of the [PLAY/ STOP] button will light up.
4.
In user song playing status, press the [PLAY/ STOP] button again to
stop playing. The LED indicator of [PLAY/STOP] button goes out.
18
A0 F#3
Chord Section