Dsp Effect; Reverb; Chorus - Kurzweil KA-90 Owner's Manual

KURZWEIl_KA-90_Manual_003_151105.pdf 16 2015-11-06 10:29:49

DSP Effect

The DSP effect is the sound localization technology for simulating the
sounds in the real environment. With DSP effect, you can add
ambience and depth to your music in a variety of ways. There are 5
reverb effects, 5 chorus effects, 5 EQ effects built into this instrument.

Reverb

Press and hold the [SHITF] button, then press the key marked
ON/OFF in the REVERB section to turn reverb effect on/off. Tap the
key marked REVER +/- which are next to the ON/OFF to select the
desired reverb type.
The default reverb effect setting is: turn on, and reverb type is: 2 Hall.
Parameter
1
2
3
4
5

Chorus

Press and hold the [SHITF] button, then press the key marked
ON/OFF in the CHORUS section to turn chorus effect on/off. Tap the
key marked CHORUS +/- which are next to the ON/OFF to select the
C
desired chorus type.
M
The default chorus effect setting is: turn off, and reverb type is: 1
Y Chorus 1.
CM
Parameter
MY
1
CY
2
CMY 3
4
K
5
EQ
EQ function can control the gain of different frequency band. And
different gain settings can make different sound field effects.
Press and hold the [SHIFT] button, then press the key marked EQ +/-
to select the desired EQ type.
The default EQ type is: 1 Standard.
Parameter
1
2
3
4
5
16
Reverb Type
Room
Hall
Church
Delay
Pan Delay
Chorus Type
Chorus 1
Chorus 2
Chorus 3
Flanger
Rotary
EQ Type
Standard
Modern
Rock
Classic
Jazz
REVERB
ON/OFF
CHORUS
ON/OFF
EQ