4.4.1.
Binary Input Attribute
Table 7 Binary Input Attribute Table
Attribute
* Added shading functions are not supported (The response is "N10").
4.5. Binary Input COS Works
First, no COS is reported when the
set then COS will be reported whenever the object status changes.
The
alarm_enabled
the types of COS reported. If the
object status
This bit is set to alarm when the
the
current state
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Type
Object Configuration
Bit 0 = COS_enabled (1)
Bit 1 = normal state
1
Bit 4 = unused
Bit 1 = override active (1)
2
3
Integer
Debouncing Value in Msec (1-65535) (JCI use only)
4
Integer32 Accumulator value (JCI use only)
bit of the
object configuration
would never have the
of the
object
status.
Contents
COS_enabled
bit is zero. If the
allow the supervisory system to control
alarm_enabled
bit is zero, then the
normal/alarm
bit set to alarm.
normal state
of the
object configuration
- 17 -
E6581540
COS_enabled
bit is
current status
of the
does not match