Sony Bravia KLV-V26A10 Operating Instructions Manual page 56

Problem
When displaying the Twin
Picture, the quality of the sub
screen picture is not as good
as that of the main screen
picture
Sound
Problem
No sound, but good picture
Noisy sound
Low sound volume
No stereo broadcast signal is
received
Stereo broadcast sound
switches on and off, or is
distorted;
The sound switches between
stereo and monaural frequently
No sound from the computer
Photo
Problem
"No files" is displayed (Cannot
see all files)
"No files that can be displayed"
is displayed
"No files in this folder that can
be displayed" is displayed
"Cannot rotate file" is displayed
"Cannot protect file" is
displayed
"Cannot delete file" is
displayed
56
GB
Cause/Remedy
• The quality of the sub screen picture may be deteriorated depending on the
combination of the input signals.
Cause/Remedy
• Press 2 +/– or % (Mute).
• Check that "Speaker" is set to "On" in the "Sound" menu (page 37).
• See the "Picture noise (dotted lines or stripes)" causes/remedies on page 55.
• "Mono" is selected. Set to "Auto" by pressing A/B (page 20).
• The stereo reception setting is inappropriate. Press A/B until "Auto" appears
on the screen (page 20).
• The antenna connection is loose or the antenna cable is damaged. Check the
cable and connection on the TV, VCR, and on the wall (page 14).
• Adjust the antenna direction for the minimum interference. Contact a Sony
dealer for advice.
• Signal transmission is low. Try using a booster. Otherwise, use the fine
tuning ("Fine) function (page 40).
• The broadcast signal has a transmission problem. Press A/B until a better
sound is heard (page 20).
• Check the connection of the audio cable (page 47).
Cause/Remedy
• Check the USB cable connection.
• Turn on the digital still camera.
• Insert a Memory Stick or memory card into the digital still camera.
• Check the Memory Stick or memory card in the digital still camera. It might
be formatted incorrectly or damaged. Try it with the digital still camera.
• Disconnect the USB cable from the digital still camera, then see if you can
view the pictures on the digital still camera.
• There are no files in the camera.
• The directories or files are not compliant with the DCF (page 30).
• Make sure the image file is a JPEG (.jpg) file.
• There are no files in the directory.
• The files in the directory are not compliant with the DCF (page 30).
• Make sure the image file in the folder is a JPEG (.jpg) file.
• The Memory Stick is locked.
• The Memory Stick is locked.
• The Memory Stick is locked.