Picture Freeze - Sony Bravia KLV-V26A10 Operating Instructions Manual

To access Text
Press /. Each time you press /, the display changes
cyclically as follows:
Text t Text over the TV picture (mix mode) t No
Text (exit the Text service)
To select a page, press the number buttons or PROG
+/-.
To hold a page, press
To reveal hidden information, press
To change the text size, press A/B/
To exit the Text service, press
Tips
• Ensure that the TV is receiving a good signal, or some text
errors may occur.
• Most TV channels broadcast a Text service. For
information on the use of the service, select the index page
(usually page 100).
• When four colored items appear at the bottom of the Text
page, Fastext is available. Fastext allows you to access
pages quickly and easily. Press the corresponding colored
button to access the page.
To enjoy stereo or bilingual programs
Switches the stereo sound or bilingual programs of
NICAM or A2 (German) stereo system.
Press A/B/ repeatedly until you receive the sound
you want.
The sound will be indicated on the screen as follows.
Broadcasting On-screen display
NICAM stereo NICAM (stereo sound)
Mono (regular sound)
NICAM bilingual NICAM Main (main sound)
NICAM Sub (sub sound)
Mono (regular sound)
NICAM monaural NICAM Main (main sound)
Mono (regular sound)
A2 (German) Mono (regular sound)
stereo
Stereo (stereo sound)
A2 (German) Main (main sound)
bilingual
Sub (sub sound)
Tips
• NICAM is receivable in following countries/regions.
Hong Kong, Singapore, New Zealand, Malaysia,
Thailand, etc.
• A2 (German) is receivable in following countries/regions.
Australia, Malaysia, Thailand, etc.
20
GB
/ .
/ .
.
/ .
Y
T
r
r
Y
Y
Y
Notes
• If the signal is very weak, the sound becomes monaural
automatically.
• If the stereo sound is noisy when receiving a NICAM
program, select "Mono". The sound becomes monaural,
but the noise is reduced.
• Receiving condition of the NICAM broadcast is subject to
the area in China.
If the sound of a monaural program is noisy or
distorted
Press A/B/ to change the on-screen display from
"Auto" to "Mono".
Notes
• The "Mono" or "Auto" setting is memorized for each
program position.
• You cannot receive a stereo broadcast signal when
"Mono" is selected for the program position.

Picture Freeze

Freezes the current picture to display it on the left
screen (e.g. to make a note of a telephone number or
recipe).
1 Press on the remote control.
2
Press again to return to normal TV mode.