Video2(Component)
Selects the type of the video jack to be used from those on the left side of the TV.
Press M/m to select one of the following, then press
Auto: Activates the component video jacks (Y, P
jack is selected when the component video jacks are not connected.
Off: Activates the composite video jack (
Power Saving
TV
Reduces the power consumption of the TV.
Press M/m to select one of the following, then press
Standard: No benefit of Power Saving.
Reduced: To view pictures with reduced power consumption.
Picture Off: To turn off the picture. You can listen to the sound at the volume you select.
Tip
You can also select the power saving mode by pressing
Light Sensor
TV
Video
Automatically optimizes the picture settings according to the ambient light in the room.
Press M/m to select "On", then press
Cinema Drive
TV
Provides an optimized display by automatically detecting the film content. Moving pictures
will appear clearer and more natural-looking.
Press M/m to select "Auto", then press
Tip
You can select this option for NTSC system pictures only.
Color System
TV
Sets the color system of the TV to that of the source you want to play back.
Press M/m to select the color system, then press
Usually select "Auto" so that an appropriate color system for the source is selected
automatically.
Initial Reset
TV
Video
Resets all the manual settings to the factory settings.
Press < to select "Ok", then press
TV
Video
Video
PC
PC
Video
Video
.
/C
, P
/C
), however, the composite video
B
B
R
R
).
.
POWER SAVING
repeatedly.
.
.
.
. Repeat this operation again.
45
GB