Table of Contents
Advertisement
USB FUNCTION
Enter Program mode, go to USB Menu Screen and press yes.
This screen will force the IMIX main board to try to establish communications with the USB Board. The
display will then show the software versions of both the main and USB board.
Installing new IMIX-5 HWB Software via a USB Flash Drive and Uploading new recipes
Prepare USB Flash Drive for Software Download.
NOTE: Updating software or recipes will require re-calibration.
1. Open the front stainless steel door of the HWB machine and flip the toggle
switches (located to the right of the head 5 whipper chamber) to their top positions
(NORMAL and ON, respectively).
2. Remove the black USB port protective plug from between the two toggle switch-
es and insert the desired USB Flash Drive into the port.
3. Wait approximately five to ten seconds (if you have an LED on your flash drive, it should light up now) and
then remove the USB flash drive from the machine and take it to your computer. The purpose of this step is
for the machine to create the necessary directory structure on your USB Flash Drive – after you have done this
directory creation procedure once for a particular flash drive you can simply start this reprogramming guide at
#4 when doing a future software update.
11
45398.2 111315
Advertisement
Table of Contents
