Port Triggering - ActionTec MI424-WR User Manual

Actiontec Wireless Broadband Router User Manual
To designate a local computer as a
1. Select DMZ Host from the left side of any Security screen. The "
screen appears.
2. Click in the "
DMZ
computer to be designated as a
puter can be a
3. Click Apply.
Click in the "
DMZ

Port Triggering

Port triggering can be used for dynamic port forwarding configuration. By setting
port triggering rules, inbound traffic is allowed to arrive at a specific network host
using ports different than those used for the outbound traffic. The outbound traf-
fic triggers which ports inbound traffic is directed.
For example, a gaming server is accessed using
gaming server responds by connecting the user using
starting gaming sessions. In this case, port triggering must be used, since it con-
flicts with the following default firewall settings:
• The firewall blocks inbound traffic by default.
• The server replies to the Router's
the host, since it is not part of a session.
To resolve the conflict, a port triggering entry must be defined, which allows
inbound traffic on
port 2222. This results in accepting the inbound traffic from the gaming
UDP
server, and sending it back to the network host which originated the outgoing traf-
fic to port 2222.
UDP
DMZ
Host Address" check box, then enter the
IP
DMZ
host at any time.
DMZ
Host Address" check box again to disable the
IP
port 3333, only after a network host generated traffic to
UDP
host:
host. Note that only one network com-
protocol on port 2222. The
UDP
UDP
, and the connection is not sent back to
IP
84
Host"
DMZ
address of the
IP
host.
DMZ
on port 3333 when