Wan Pppoe/Wan Pppoe 2 - ActionTec MI424-WR User Manual

Routing Table
Click New Route to generate the "New Route" window, where a new route can
be configured.
Additional IP Addresses
Click New IP Address to generate the "Additional
additional addresses can be created to access the Router via the connection.
IP

WAN PPPoE/WAN PPPoE 2

Point-to-Point Protocol over Ethernet (
WAN
standards: Point-to-Point Protocol and Ethernet.
worked computers to exchange information with computers on the Internet.
supports the protocol layers and authentication widely used in
a point-to-point connection to be established in the normally multipoint archi-
tecture of Ethernet. A discovery process in
address of the remote device in order to establish a session.
Click WAN PPPoE in the Network Connections screen to generate the "
Properties" screen. This screen displays a list of the connection's proper-
PPPoE
ties. The only modifications that can be made from this screen are disabling the
connection (by clicking Disable) or renaming the connection (by entering a new
name in the "Name" text box).
Chapter 5 Using Network Connections
Address Settings" screen, where
IP
) relies on two widely accepted
PPPoE
enables Ethernet net-
PPPoE
determines the Ethernet
PPPoE
69
PPPoE
and enables
PPP
MAC
WAN