ActionTec MI424-WR User Manual page 10

Ethernet WAN Light
The Ethernet
WAN
Internet via Ethernet. If flashing, data traffic is passing across the port.
Coax WAN Light
The Coax light glows steadily or flashes when the Router is connected to
WAN
the Internet via coaxial cable.
Internet Light
When the Internet light glows steadily green, the Router is connected to the
(Internet Service Provider). If it glows amber, there is a physical connection to
the (Optical Network Terminator), but authentication has not taken place
ONT
(i.e., no address is present).
IP
Ethernet LAN Lights (1, 2, 3, 4)
The Ethernet
LAN
network via one or more of its Ethernet ports. If flashing, data traffic is passing
across the port(s).
Coax LAN Light
The Coax light glows steadily or flashes when the Router is connected to a
LAN
local network via its Coax port.
Wireless Light
The Wireless light illuminates when the Router's wireless access point is turned
on. If flashing, data traffic is passing across the wireless connection.
Chapter 1 Introduction
light illuminates when the Router is connected to the
lights illuminate when the Router is connected to a local
5
ISP