ActionTec MI424-WR User Manual page 38

WEP
If was selected in the Advanced Security Settings screen, the "
WEP
screen appears.
1. Select the appropriate network authentication level from the drop-
down list. Options include Open System Authentication, Shared Key
Authentication, or Both.
2. Activate
WEP
3. Select the length of key 1 by selecting "64/40 bit" or "128/104 bit" from the
appropriate drop-down list in the "Key Length" column.
4. Select the type of key from the appropriate drop-down list in the "Entry
Method" column. If "Hex" is selected, the key must be made up of hexadec-
imal digits. If "
5. Enter the key in the appropriate text box in the "Encryption Key" column.
If 64/40 bit was chosen in step 2, enter 10 characters. If 128/104 bit was cho-
sen, enter 24 characters. Depending on what option was selected in step 3,
enter hexadecimal or
6. Click Apply to save changes.
Chapter 4 Creating a Wireless Network
key 1 by clicking the radio button next to "1" on the left side.
" is selected, the key can be made up of any characters.
ASCII
characters.
ASCII
33
Key"
WEP