Setting Up Your Set Top Box Receiver For The Guide Plus+ System (For Analogue Broadcasting) - Sony RDR-HXD1070 Operating Instructions Manual

Select "Guide (Digital)" to use the digital
electronic programme guide (see "Guide
to Digital Services (For Freeview users
only)" on page 48).
Select "Guide (Digital)" if you receive
only digital broadcasts.
Select "GUIDE Plus+" to use the
Gemstar GUIDE Plus+ electronic
programme guide (see "GUIDE Plus+
(For analogue broadcasting only)" on
page 63).
TV Screen Size (page 144)
If you have a wide-screen TV, select
"Wide (16:9)." If you have a standard
TV, select "Standard (4:3)." This will
determine how "wide-screen" images are
displayed on your TV.
Progressive
When you connect a progressive format
TV to this recorder using the
COMPONENT VIDEO OUT jacks,
select "Compatible."
HDD caution messages
Read the HDD caution messages, and
press ENTER.
4
Select "Finish Setup" using M/m, and
press ENTER.
"Easy Setup" is completed.
To return to the previous step
Press O RETURN.
z Hint
If you want to run "Easy Setup" again, select "Easy
Setup" in the "Basic" setup from "Initial Setup" in
the System Menu (page 130).
28
Setting up your set top box
receiver for the GUIDE Plus+
system (For analogue
broadcasting)
Follow the steps below to set up the GUIDE
Plus+ system and set top box controller. The
GUIDE Plus+ system is available in the UK
only.
1
Press GUIDE.
The GUIDE Plus+ system "Basic Setup"
appears.
For users other than in the UK, go to
step 4.
2
Select "Postal Code," and press
ENTER.
3
Enter your postal code using </M/m/
,, and press ENTER.
If "Country" is set to "Others," you
cannot enter a postal code and the
GUIDE Plus+ system will not search for
a host channel.
4
Select "External Receiver 1," and
press ENTER.
You can also select "External Receiver
2" or "External Receiver 3" if you have
connected additional set top box
receivers.
5
Press ENTER to select "Continue."
6
Select the set top box receiver type
using M/m, and press ENTER.
7
Select the provider using M/m, and
press ENTER.
®