Step 3: Connecting The Audio Cords/Hdmi Cord - Sony RDR-HXD1070 Operating Instructions Manual

Step 3: Connecting the Audio Cords/HDMI Cord

Select one of the following patterns, A or B, according to the input jack on your TV monitor,
projector, or audio component such as an AV amplifier (receiver). This will enable you to listen
to sound.
Rear (L)
Front (L)
Centre
: Signal flow
* The yellow plug is used for video signals (page 19).
A Digital audio input jack
If your audio component has a Dolby
*2
Digital, DTS , or MPEG audio decoder and
a digital input jack, use this connection. You
can enjoy Dolby Digital (5.1ch), DTS
(5.1ch), and MPEG audio (5.1ch) surround
effects.
22
[Speakers]
HDMI cord
(not supplied)
to HDMI OUT
to LINE 2 OUT (R-AUDIO-L)
(white)
(red)
Audio/video cord
(not supplied)
(yellow)*
Audio component with
a decoder
or to coaxial/HDMI digital input
to DIGITAL OUT (COAXIAL)
If you connect a Sony audio component that
*1
is compatible with the HDMI control
function, refer to the operating instructions
supplied with the audio component.
[Speakers]
Rear (R)
Front (R)
Subwoofer
Coaxial digital cord
(not supplied)
DVD recorder
INPUT
VIDEO
(yellow)
L
(white)
AUDIO
R
(red)
TV, projector, or
audio component
A
B