A: Connecting A Set Top Box Receiver (Rdr-At105/At107/At205 Only) - Sony AT100 Operating Instructions Manual

A: Connecting a set top box receiver (RDR-AT105/AT107/AT205
only)
With this hookup, you can record any programme position on the set top box receiver.
To watch cable programmes, you need to match the programme position on the recorder to
the aerial output programme position on the set top box receiver.
Wall
: Signal flow
*1
If your set top box receiver does not have an aerial output jack, connect the aerial cable to the recorder's
AERIAL IN jack.
*2
Connect only if your set top box receiver has a SCART connector.
If the set top box receiver can output RGB signals
This recorder accepts RGB signals. If the set top box receiver can output RGB signals,
connect the TV SCART connector on the set top box receiver to the LINE 1/DECODER jack,
and set "LINE 1 In" to "RGB" in the "Video In/Out" setup (page 123). Refer to the
instructions supplied with the set top box receiver.
16
Set top box
receiver
ANT IN
TO TV
Aerial cable* 1
(not supplied)
to AERIAL IN
to AERIAL OUT
Aerial cable
(supplied)
Place the set top box controller
near the remote sensor on the
set top box receiver.
Set top box
controller
(page 17)
SCART cord*
(not supplied)
to aerial input
2
to G-LINK
DVD recorder
TV