Set Up A Guest Wifi Network - NETGEAR Nighthawk RS400 User Manual

Nighthawk AC2300 Cybersecurity WiFi Router Model RS400
The user name is admin. The password is the one that you specified the first time
you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Wireless.
The Wireless Setup page displays.
5. In the Wireless Network (2.4GHz b/g/n) section, select a percentage from the
Transmit Power Control menu.
6. In the Wireless Network (5GHz a/n/ac) section, select a percentage from the Transmit
Power Control menu.
7. Click the Apply button.
Your settings are saved.

Set up a guest WiFi network

A guest network lets you share your Internet connection with visitors without telling
them your WiFi security password. You can create a different WiFi password for the
guest network. The guest network WiFi mode and channel settings are the same as your
2.4 GHz and 5 GHz WiFi networks.
By default, the guest WiFi network is disabled. You can set up the guest WiFi network
for each WiFi band. The router simultaneously supports the 2.4 GHz band for 802.11n,
802.11g, and 802.11b devices and the 5 GHz band for 802.11ac, 802.11n, and 802.11a
devices.
The router provides two default guest networks with the following names (SSIDs):
• 2.4 GHz guest WiFi network SSID. NETGEAR_Guest
• 5 GHz guest WiFi network SSID. NETGEAR-5G_Guest
By default, these networks are configured as open networks without security but are
disabled. You can enable one or both networks. You can also change the SSIDs for
these networks.
To set up a guest network:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
Manage the WiFi Network
Settings
96 User Manual