Kurzweil MP120A User Manual page 16

Function Button
Chapter7
1. Style Volume
This function will adjust the accompaniment volume, so as to keep an appropriate
balance between the accompaniment volume and the voice volume.
Press the [Function] button.
Select "Acc Volume" by pressing the [Layer] button, then control the volume by
pressing the [Next] or [Previous] button.
The volume range is from 0 (minimum) to 100 (maximum).
The default volume setting is "70".
2. Accompaniment
You can turn on/off the automatic accompaniment.
Press the [Function] button.
Select "Accompaniment" by pressing the [Layer] button, then turn it on or off by
pressing the [Next] or [Previous] button.
The default setting is "Acc On", which means you are ready to start the automatic
accompaniment. If the LCD display shows "Acc Off", the accompaniment is turned off
and only rhythm pattern is played.
3. Reverb
You can select a type of Reverbs.
Press the [Function] button.
Select "Reverb" by pressing the [Layer] button, then select a reverb type by pressing
the [Next] or [Previous] button.
The default setting is "Room 1".
Selectable Reverb: Off, Room 1, Room 2, Hall 1, Stage
4. Effect
You can select a type of Effects.
Press the [Function] button.
Select "Effect Off" by pressing the [Layer] button, then select an effect type by
pressing the [Next] or [Previous] button.
The default setting is "Off".
Selectable Effect: Off, Chorus, Phaser, Tremolo, Rotary
5. Effect Level
You can control the level of Effects.
Press the [Function] button.
Select "Effect Level" by pressing the [Layer] button, then select an effect level by
pressing the [Next] or [Previous] button.
The default setting is "60".
You can adjust the effect level from 0 to 127.
Function Button
16