Jumper Settings - Baldor DBSC105-AAA-1 Installation And Operating Manual

Section
Note: RS-232 is not available for model DBSC 10X-BXX.
Note: RS422/485 is not available for model DBSC 10X-AXX.
Determine the desired mode of operation. Refer to Table 4-3 and determine the
correct jumper positions for that mode.
Jumpers
SB 601-609
SB 601-609
* Indicates factory jumper setting.
1. Remove the DBSC cover to gain access to the jumpers.
2. For RS232 mode, check that jumpers SB 601-609 are at pins 1-2.
3. For RS422/485 mode, check that jumpers SB 601-609 are at pins 3-4.
4. Reinstall the cover.
MN1229

Jumper Settings

Table 4-3 Jumper Setting Configuration
Function
RS232
RS422 or 485
Jumper Position
1-2
2-3
Option
Axx* / Exx* / Fxx
Bxx* / Exx / Fxx*
4–3