Honeywell Accenta Series Engineer's Manual page 36

Omit Allow & Double Knock
LED Keypad:
Press [CHIME] to toggle double knock status on or off.
Press [9] to turn all double knock zones on.
Press [0] to turn all double knock zones off.
• Press [OMIT] to enter into menu. LED's 1 and 2 are on.
• Press [1] to select Double Knock.
• Press zone number [1-8] to choose a particular zone.
• Press the zone [number] or [CHIME] to toggle the double
knock status on or off. The appropriate LED is on when the zone is
set up as Double Knock. Default settings are off.
• Press [RESET] twice to leave the menu.
2 = Omit Allow
When a zone is programmed as Omit Allow, the panel allows the zone to be omitted for one set period by the
user when setting the system.
Programming a Zone as Omit Allow
The [up arrow] scrolls through zones.
Press [CHIME] to toggle omit allow status on or off.
Press [9] to turn all omit allow zones on.
Press [0] to turn all omit allow zones off.
LCD Keypad:
While in Engineer program mode press [OMIT]or press [up arrow]
until 0>Omit allow & Double Knock is displayed then press [SET].
• Press [2] to select Omit Allow. The first zone is
displayed with status on or off.
• Press the [zone number] or [CHIME] to toggle the
status on or off.
• Press the [up arrow] or [zone number] to go to the
other zones and follow the same procedure as above.
• Press [RESET] twice to leave the menu.
Accenta/Optima Engineer's Manual
1. Double Knock 1. Double Knock 1. Double Knock
1. Double Knock 1. Double Knock
2. Omit Allow 2. Omit Allow
2. Omit Allow 2. Omit Allow 2. Omit Allow
2: <Zone Name> 2: <Zone Name> 2: <Zone Name> 2: <Zone Name> 2: <Zone Name>
Omit Allow:NO Omit Allow:NO
Omit Allow:NO Omit Allow:NO Omit Allow:NO
2: <Zone Name> 2: <Zone Name> 2: <Zone Name> 2: <Zone Name> 2: <Zone Name>
Omit Allow:YES Omit Allow:YES
Omit Allow:YES Omit Allow:YES Omit Allow:YES
Omit Allow & Omit Allow & Omit Allow & Omit Allow & Omit Allow &
Double Knock Double Knock Double Knock
Double Knock Double Knock
32
[OMIT]
1 2 3 4 5 6
[1]
1 2 3 4 5 6
[1-8] or [CHIME]
1 2 3 4 5 6
[RESET]
4 5
1 2 3 6
[OMIT]
[2]
[zone number] or [CHIME]
[RESET]
7 8
7 8
7 8
7 8