Sony PDW-F30 Operating Instructions Manual page 84

VIDEO CONTROL [Video]: Settings related to video
control
CC (F2) BLANK [> CC2 blank]: Select whether to suppress
the closed caption signal to be superimposed on the 2nd
field of the output video signal.
Note
When you play back a disc with a recorded closed caption
signal, the closed caption signal is multiplexed into composite
output only.
FRAME PB [> Frame PB]: Select whether to output fields or
frames as still images of video.
PROCESS CONTROL
[> Proc ctrl]: Separate
adjustment screens
appear for the following
items. Use the jog dial to
make settings, and press
the MENU button to return
from the adjustment
screens to the second
level of the setup menu.
UP CONVERT [> UP
convert]: Specify
upconvert output.
DOWN CONVERTER [>
Down conv]: Set up the
down converter.
AUDIO CONTROL [Audio]: Settings related to audio
control
REC MODE [> REC mode]: Select the audio recording mode. *4ch×16bit [>> 4ch/16bit]: 4-channel, 48-kHz mode
84
System Menu
VIDEO GAIN [>> V gain]:
Adjust the video output
level.
CHROMA GAIN [>> C gain]:
Adjust the chroma output
level
CHROMA PHASE [>> C
phase]: Adjust the
chroma phase.
SETUP LEVEL [>> Setup
lev]: Adjust setup level.
AUTO SQEEZE [>> Auto
SQZ]: Select whether to
use auto squeeze mode.
CONV MODE [>> Conv
mode]: Select the
conversion mode.
DETAIL GAIN [>> Detail]:
Select the gain level of
the up converter image
enhancer.
CONV MODE [>> Conv
mode]: Select the
conversion mode.
Note
"SQEEZE" (squeeze mode) is
selected automatically during
recording.
DETAIL GAIN [>> Detail]:
Select the gain level of
the down converter
image enhancer.
CROSS COLOR [>> Cross
col]: Turn cross color
adjustment on or off.
Description
*OFF [>> OFF]: Suppress.
ON [>> ON]: Do not suppress.
*AUTO [>> AUTO]: Output a field image when the format is
interlaced, and output a frame image when the format is
progressive.
FRAME[>> FRAME]: Always output a frame image.
–848 [>>> –848] to 847 [>>> 847]
Factory default setting: *0 [>>> 0]
–848 [>>> –848] to 847 [>>> 847]
Factory default setting: *0 [>>> 0]
–128 [>>> –128] to 127 [>>> 127]
Factory default setting: *0 [>>> 0]
–272 [>>> –272] to 271 [>>> 271]
Factory default setting: *0 [>>> 0]
*OFF [>>> OFF]: Do not use.
ON [>>> ON]: Use.
*EDGE CROP [>>> Edge Crop]: Edge crop mode
LETER BOX [>>> LetterBox]: Letter box mode
SQEEZE [>>> Squeeze]: Squeeze mode
*LOW [>>> Low]: Low
MID [>>> Mid]: Mid
HIGH [>>> High]: High
*EDGE CROP [>> Edge Crop]: Edge crop mode
LETER BOX [>> LetterBox]: Letter box mode
SQEEZE [>> Squeeze]: Squeeze mode
*LOW [>> Low]: Low
MID [>> Mid]: Mid
HIGH [>> High]: High
*OFF [>>> OFF]: The image enhancer uses default settings
for cross color.
ON [>>> ON]: The image enhancer adjusts so that there are
fewer cross colors.
Description
2ch×16bit [>> 2ch/16bit]: 2-channel, 48-kHz mode